Item | Unit | GD-52TW | |
Spindle
| Spindle bearing | - | Front and back reloading |
Spindle taper | -# | 2 | |
Spindle servo motor | KW | 11 | |
Spindle speed | r/min | 0-3800 | |
Spindle through-hole | mm | 66 | |
Spindle center height above ground | mm | 1082 | |
Spindle nose | - | A2-6 | |
Bed | Inclination of the bed to the horizontal plane | ° | 30 |
Screws | Ball screw | mm | 4010/C3 |
Linear rail | Ball guide | mm | 45/H |
Turret | Turret servo drive motor | KW | 0.75 |
Turret locking method | - | hydraulic | |
Number of tools in turret | pcs | 12 | |
Tool square/round | mm | 25*25/φ32 | |
X/Y Axis | Servo motor | KW | 2.4 |
Position accuracy | Positioning accuracy | mm | ±0.0025 |
Repeat positioning accuracy | mm | ±0.0025 | |
| X/Z axis | m/min | 24/24 |
Travel
| Movement range X/Z | mm | 230/540 |
Tool holder table to spindle center height | mm | 100 | |
Tailstock | Diameter of center bushing | mm | 80 |
Travel of center | mm | 300 | |
Center bushing taper | - | MT4 | |
Cutting capacity
| Max. turning diameter | mm | φ560 |
Max. passable bar diameter | mm | 51/61 | |
Max. machining diameter | mm | φ450 | |
Max. machining length | mm | 520 | |
Maximum length between spindle end face and tailstock end face | mm | 800 | |
Maximum length between spindle end face and left end face of turret | mm | 630 | |
Other | Total machine power | KW/H | About 18 |
Actual power consumption | KW/h | About 5 | |
Lubrication pump capacity | L | 1.5 | |
Lubrication oil specification | # | #68 | |
Hydraulic station capacity | L | 45 | |
Hydraulic oil specification | # | 46/32 | |
Machine weight | kg | About 3900 | |
Machine dimensions | L/W/H | 2560*1550*1700 | |
*The accuracy of the machine tool is recorded under the basic working conditions of a constant temperature environment and a solid ground on the first floor. | |||