Share to:

GooDa CNC Gantry Machining Center GDGM-6036RNC

Name: GooDa CNC Gantry Machining Center GDGM-6036RNC
Rating: 5.0 (58 reviews)

The Features: The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.

Model:GDGM-6036RNC		Unit	Specification
Process Range	X axis travel	mm	6500
	Y axis travel	mm	3800
	Z axis travel	mm	1250
	Spindle nose to worktable surface	mm	250~1500
	Distance between two columns	mm	3600
Worktable	Table Size	mm	6000×3000
	MAX Loading weight	kg	36000
	T-Slot (Number/Width/Gap)	-	13×28×225
Spindle	Spindle Speed	rpm	3000
	Spindle Taper	-	BT50
	Spindle Motor	KW	30/37
Speed	Rapid Moving (X/Y/Z)	m/min	12/10/12
Speed	Rapid Feed (X/Y/Z)	m/min	10/10/10
Tool Magazine	Tool Magazine Number	pcs	24
	Tool MAX Diameter/length/weight	-	Æ112mm/350mm/15kg
	Tool MAX Diameter (Full/Empty)	mm	112/200
	Tool selection method	-	any/sequence
	Time (tool-tool)	S	1.8
Machine Accuracy	Positioning (X/Y/Z)	mm	0.04/0.03/0.02
Machine Accuracy	Re-Positioning (X/Y/Z)	mm	0.024/0.02/0.012
Others	Air source	L/min	500
	Air pressure	Bar	6~8
	Total electrical capacity	KVA	80
	Water tank capacity	L	1500
	Machine size	mm	16500×7200×6500
	Machine weight	kg	75000
System	FANUC SYSTEM OR Mitsubishi controller	-	Optional

The information in this catalog are as of Sep.2021,and are subject to change without notice.

Home