|
| Quantity: | |
|---|---|
GDGM-2014BNC
The Features
The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-2014BNC |
Unit |
Specification |
|
Process Range |
X axis travel |
mm |
2000 |
Y axis travel |
mm |
1600 |
|
Z axis travel |
mm |
800 |
|
Spindle nose to worktable surface |
mm |
200~ 1000 |
|
Distance between two columns |
mm |
1400 |
|
Worktable |
Table Size |
mm |
2200×1200 |
MAX Loading weight |
kg |
6000 |
|
T-Slot (Number/Width/Gap) |
- |
7×22×180 |
|
Spindle |
Spindle Speed |
rpm |
6000 |
Spindle Taper |
- |
BT50 |
|
Spindle Motor |
KW |
15/18.5 |
|
Speed
|
Rapid Moving (X/Y/Z) |
m/min |
24/24/12 |
Rapid Feed (X/Y/Z) |
m/min |
10/10/10 |
|
Tool Magazine |
Tool Magazine Number |
pcs |
24 |
Tool MAX Diameter/length/weight |
- |
Æ112mm/350mm/15kg |
|
Tool MAX Diameter (Full/Empty) |
mm |
112/200 |
|
Tool selection method |
- |
any/sequence |
|
Time (tool-tool) |
S |
1.8 |
|
Machine Accuracy |
Positioning (X/Y/Z) |
mm |
0.02/0.02/0.015 |
Re-Positioning (X/Y/Z) |
mm |
0.009/0.009/0.008 |
|
Others |
Air source |
L/min |
280 |
Air pressure |
Bar |
6~8 |
|
Total electrical capacity |
KVA |
40 |
|
Water tank capacity |
L |
400 |
|
Machine size |
mm |
5800×3700×4300 |
|
Machine weight |
kg |
16000 |
|
System |
FANUC SYSTEM OR Mitsubishi controller |
- |
Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
The Features
The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-2014BNC |
Unit |
Specification |
|
Process Range |
X axis travel |
mm |
2000 |
Y axis travel |
mm |
1600 |
|
Z axis travel |
mm |
800 |
|
Spindle nose to worktable surface |
mm |
200~ 1000 |
|
Distance between two columns |
mm |
1400 |
|
Worktable |
Table Size |
mm |
2200×1200 |
MAX Loading weight |
kg |
6000 |
|
T-Slot (Number/Width/Gap) |
- |
7×22×180 |
|
Spindle |
Spindle Speed |
rpm |
6000 |
Spindle Taper |
- |
BT50 |
|
Spindle Motor |
KW |
15/18.5 |
|
Speed
|
Rapid Moving (X/Y/Z) |
m/min |
24/24/12 |
Rapid Feed (X/Y/Z) |
m/min |
10/10/10 |
|
Tool Magazine |
Tool Magazine Number |
pcs |
24 |
Tool MAX Diameter/length/weight |
- |
Æ112mm/350mm/15kg |
|
Tool MAX Diameter (Full/Empty) |
mm |
112/200 |
|
Tool selection method |
- |
any/sequence |
|
Time (tool-tool) |
S |
1.8 |
|
Machine Accuracy |
Positioning (X/Y/Z) |
mm |
0.02/0.02/0.015 |
Re-Positioning (X/Y/Z) |
mm |
0.009/0.009/0.008 |
|
Others |
Air source |
L/min |
280 |
Air pressure |
Bar |
6~8 |
|
Total electrical capacity |
KVA |
40 |
|
Water tank capacity |
L |
400 |
|
Machine size |
mm |
5800×3700×4300 |
|
Machine weight |
kg |
16000 |
|
System |
FANUC SYSTEM OR Mitsubishi controller |
- |
Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
