Availability: | |
---|---|
Quantity: | |
The Features: The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-6036RNC | Unit | Specification | |
Process Range | X axis travel | mm | 6500 |
Y axis travel | mm | 3800 | |
Z axis travel | mm | 1250 | |
Spindle nose to worktable surface | mm | 250~1500 | |
Distance between two columns | mm | 3600 | |
Worktable | Table Size | mm | 6000×3000 |
MAX Loading weight | kg | 36000 | |
T-Slot (Number/Width/Gap) | - | 13×28×225 | |
Spindle | Spindle Speed | rpm | 3000 |
Spindle Taper | - | BT50 | |
Spindle Motor | KW | 30/37 | |
Speed
| Rapid Moving (X/Y/Z) | m/min | 12/10/12 |
Rapid Feed (X/Y/Z) | m/min | 10/10/10 | |
Tool Magazine | Tool Magazine Number | pcs | 24 |
Tool MAX Diameter/length/weight | - | Æ112mm/350mm/15kg | |
Tool MAX Diameter (Full/Empty) | mm | 112/200 | |
Tool selection method | - | any/sequence | |
Time (tool-tool) | S | 1.8 | |
Machine Accuracy | Positioning (X/Y/Z) | mm | 0.04/0.03/0.02 |
Re-Positioning (X/Y/Z) | mm | 0.024/0.02/0.012 | |
Others | Air source | L/min | 500 |
Air pressure | Bar | 6~8 | |
Total electrical capacity | KVA | 80 | |
Water tank capacity | L | 1500 | |
Machine size | mm | 16500×7200×6500 | |
Machine weight | kg | 75000 | |
System | FANUC SYSTEM OR Mitsubishi controller | - | Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021
The Features: The machine adopts the gantry structure of moving table. The bed is fixed, the worktable moves in the X direction on the bed; the ram moves in the Z direction on the sliding seat; the sliding seat and the ram move in the Y direction on the gantry beam; the X and Y axes adopt heavy-duty linear rails, Z The shaft is a plastic hard rail. The main shaft assembly is placed at the lower end of the ram; the whole machine has a reasonable layout, beautiful appearance and convenient operation.
Spindle box: We use high-speed BT50 spindle unit with center blowing.
Tool Magazine: We use disc magazine with high quality and stable functionality. (Optional)
Transmission: The three-axis motor and high-precision ball screw adopt a direct drive method. The ball screw is pre-tensioned and installed to improve transmission rigidity and positioning accuracy.
Model:GDGM-6036RNC | Unit | Specification | |
Process Range | X axis travel | mm | 6500 |
Y axis travel | mm | 3800 | |
Z axis travel | mm | 1250 | |
Spindle nose to worktable surface | mm | 250~1500 | |
Distance between two columns | mm | 3600 | |
Worktable | Table Size | mm | 6000×3000 |
MAX Loading weight | kg | 36000 | |
T-Slot (Number/Width/Gap) | - | 13×28×225 | |
Spindle | Spindle Speed | rpm | 3000 |
Spindle Taper | - | BT50 | |
Spindle Motor | KW | 30/37 | |
Speed
| Rapid Moving (X/Y/Z) | m/min | 12/10/12 |
Rapid Feed (X/Y/Z) | m/min | 10/10/10 | |
Tool Magazine | Tool Magazine Number | pcs | 24 |
Tool MAX Diameter/length/weight | - | Æ112mm/350mm/15kg | |
Tool MAX Diameter (Full/Empty) | mm | 112/200 | |
Tool selection method | - | any/sequence | |
Time (tool-tool) | S | 1.8 | |
Machine Accuracy | Positioning (X/Y/Z) | mm | 0.04/0.03/0.02 |
Re-Positioning (X/Y/Z) | mm | 0.024/0.02/0.012 | |
Others | Air source | L/min | 500 |
Air pressure | Bar | 6~8 | |
Total electrical capacity | KVA | 80 | |
Water tank capacity | L | 1500 | |
Machine size | mm | 16500×7200×6500 | |
Machine weight | kg | 75000 | |
System | FANUC SYSTEM OR Mitsubishi controller | - | Optional |
The information in this catalog are as of Sep.2021,and are subject to change without notice.
© GOODA MACHINERY MANUFACTURING CO.,LTD. All rights reserved.001 Sep.2021