Gantry machining center is a large machine tool, which is specially designed for processing large parts. It is mainly used in heavy industry, such as aircraft, automobiles, ships, etc. It mainly processes large and complex workpieces, such as beams, frames and large Some parts of the machinery, etc. The gantry center is mainly composed of two columns, beams, saddles and other components. Two guide rails are set on the beam, the existing guide rails are generally set on the same level of the beam, which is easy to produce vibration in the processing process and affect the precision of the produced parts. GooDa Machinery introduced a vertical gantry machining center to solve the problems raised in the above background technology.
READ MORE
The existing fixed beam gantry machining center generally collects the chip waste directly from the base to the waste box by cleaning, but the cleaning operation cannot be carried out in real time, and can only be carried out after the shutdown or the end of the work, so the base is cleaned when cleaning. The accumulated amount of chip waste is relatively large, the cleaning is inconvenient and time-consuming, and before the chip waste is cleaned, it may also affect the operation of the fixed beam gantry machining center. To this end, GooDa Machinery introduced a fixed beam gantry machining center that can overcome the above problems.
READ MORE
Gantry machining center is a kind of machining center. It is a new type of machining technology with high degree of automation, high production efficiency, high precision and stable quality. Its main job is to compile the processing program, that is, to convert the original manual work into computer programming, compile all the process, process parameters and displacement data to be processed into a program, and use it to control the processing of the machine tool.
READ MORE
There are many kinds of machining centers, including gantry machining centers, vertical machining centers, and horizontal machining centers. The most common is our vertical machining center. How to distinguish between vertical machining centers and horizontal machining centers, and how to choose according to processing needs the machining center is described in detail in this article, and the structure of the horizontal machining center is more complicated than that of the vertical machining center, so the price is also much higher.
READ MORE
The machining center is equipped with a tool magazine and has the function of automatic tool change. It can perform multi-process processing after clamping the workpiece at one time, thus greatly reducing the clamping time of the workpiece. It is suitable for processing complex shapes, high precision requirements, and frequent variety replacement artifact. However, the existing horizontal machining center still has certain limitations for the workpiece that needs to be processed on multiple sides. After the workpiece is processed, it is generally necessary to stop and re-clamp the workpiece to be processed, so the further improvement of the processing efficiency is affected. In order to overcome the deficiencies in the existing technology, GooDa Machinery introduced a double-sided composite horizontal machining center that can further improve the processing efficiency.
READ MORE
The vertical machining center refers to the machining center in which the axis of the main shaft and the worktable are vertically arranged. The three-axis rail vertical machining center that can realize three-axis linkage is mainly suitable for processing plates, discs, molds and small shells. For complex parts, it can complete milling, boring, drilling, tapping and thread cutting processes. However, in the existing vertical machining center, the chips generated during machining are easy to be sputtered around, and are easily stuck into the main body of the machining center, which affects the stability and reliability of the operation. In order to solve this technical problem, GooDa Machinery introduced a three-axis rail vertical machining center.
READ MORE
Machining center, referred to as CNC, is a highly automated machine tool composed of mechanical equipment and numerical control system used to process complex-shaped workpieces. Machining centers were originally developed from CNC milling machines. But the machining center is not the same as the CNC milling machine. The biggest difference between the machining center and the CNC milling machine is that the machining center has the function of automatic tool exchange. After the workpiece is clamped once on the machining center, the machining tool on the main shaft is changed by the automatic tool changer, which can complete various processes on more than two surfaces, and realize drilling, boring, reaming, tapping, grooving, etc. Various processing functions. And there are a variety of tool change or tool selection functions, so that the production efficiency is greatly improved.
READ MORE